dmesg - i9 10900K
Linux version 5.6.6-300.fc32.x86_64 (mockbuild@bkernel03.phx2.fedoraproject.org) (gcc version 10.0.1 20200328 (Red Hat 10.0.1-0.11) (GCC)) #1 SMP Tue Apr 21 13:44:19 UTC 2020
Command line: BOOT_IMAGE=(hd0,gpt2)/vmlinuz-5.6.6-300.fc32.x86_64 root=/dev/mapper/fedora_localhost--live-root ro resume=/dev/mapper/fedora_localhost--live-swap rd.lvm.lv=fedora_localhost-live/root rd.lvm.lv=fedora_localhost-live/swap rhgb quiet
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: xstate_offset[9]: 960, xstate_sizes[9]: 8
x86/fpu: Enabled xstate features 0x21f, context size is 968 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003cee0fff] usable
BIOS-e820: [mem 0x000000003cee1000-0x000000003cee1fff] ACPI NVS
BIOS-e820: [mem 0x000000003cee2000-0x000000003cf04fff] usable
BIOS-e820: [mem 0x000000003cf05000-0x000000003cf05fff] reserved
BIOS-e820: [mem 0x000000003cf06000-0x000000003d11afff] usable
BIOS-e820: [mem 0x000000003d11b000-0x000000003e11afff] reserved
BIOS-e820: [mem 0x000000003e11b000-0x000000003e24afff] ACPI data
BIOS-e820: [mem 0x000000003e24b000-0x000000003e34afff] ACPI NVS
BIOS-e820: [mem 0x000000003e34b000-0x000000003eefefff] reserved
BIOS-e820: [mem 0x000000003eeff000-0x000000003eefffff] usable
BIOS-e820: [mem 0x000000003ef00000-0x000000003fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fc000000-0x00000000fc00ffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000004bdffffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x36517018-0x3652fa57] usable ==> usable
e820: update [mem 0x36517018-0x3652fa57] usable ==> usable
e820: update [mem 0x363dc018-0x36411257] usable ==> usable
e820: update [mem 0x363dc018-0x36411257] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009dfff] usable
reserve setup_data: [mem 0x000000000009e000-0x000000000009efff] reserved
reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x00000000363dc017] usable
reserve setup_data: [mem 0x00000000363dc018-0x0000000036411257] usable
reserve setup_data: [mem 0x0000000036411258-0x0000000036517017] usable
reserve setup_data: [mem 0x0000000036517018-0x000000003652fa57] usable
reserve setup_data: [mem 0x000000003652fa58-0x000000003cee0fff] usable
reserve setup_data: [mem 0x000000003cee1000-0x000000003cee1fff] ACPI NVS
reserve setup_data: [mem 0x000000003cee2000-0x000000003cf04fff] usable
reserve setup_data: [mem 0x000000003cf05000-0x000000003cf05fff] reserved
reserve setup_data: [mem 0x000000003cf06000-0x000000003d11afff] usable
reserve setup_data: [mem 0x000000003d11b000-0x000000003e11afff] reserved
reserve setup_data: [mem 0x000000003e11b000-0x000000003e24afff] ACPI data
reserve setup_data: [mem 0x000000003e24b000-0x000000003e34afff] ACPI NVS
reserve setup_data: [mem 0x000000003e34b000-0x000000003eefefff] reserved
reserve setup_data: [mem 0x000000003eeff000-0x000000003eefffff] usable
reserve setup_data: [mem 0x000000003ef00000-0x000000003fffffff] reserved
reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
reserve setup_data: [mem 0x00000000fc000000-0x00000000fc00ffff] reserved
reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x00000004bdffffff] usable
efi: EFI v2.70 by American Megatrends
efi: ACPI=0x3e2a8000 ACPI 2.0=0x3e2a8014 SMBIOS=0x3ea49000 SMBIOS 3.0=0x3ea48000 MEMATTR=0x3856e018 ESRT=0x385a3b18 RNG=0x3ea7c698
efi: seeding entropy pool
secureboot: Secure boot disabled
SMBIOS 3.2.0 present.
DMI: Gigabyte Technology Co., Ltd. Z490 AORUS MASTER/Z490 AORUS MASTER, BIOS F3 03/25/2020
tsc: Detected 3700.000 MHz processor
tsc: Detected 3699.850 MHz TSC
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x4be000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0080000000 mask 7F80000000 uncachable
1 base 0040000000 mask 7FC0000000 uncachable
2 base 2000000000 mask 6000000000 uncachable
3 base 1000000000 mask 7000000000 uncachable
4 base 0800000000 mask 7800000000 uncachable
5 base 4000000000 mask 4000000000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x3ef00 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000385a3b18 to 0x00000000385a3b50.
e820: update [mem 0x385a3000-0x385a3fff] usable ==> reserved
Using GB pages for direct mapping
BRK [0x2ac801000, 0x2ac801fff] PGTABLE
BRK [0x2ac802000, 0x2ac802fff] PGTABLE
BRK [0x2ac803000, 0x2ac803fff] PGTABLE
BRK [0x2ac804000, 0x2ac804fff] PGTABLE
BRK [0x2ac805000, 0x2ac805fff] PGTABLE
BRK [0x2ac806000, 0x2ac806fff] PGTABLE
BRK [0x2ac807000, 0x2ac807fff] PGTABLE
BRK [0x2ac808000, 0x2ac808fff] PGTABLE
secureboot: Secure boot disabled
RAMDISK: [mem 0x31f1b000-0x34889fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000003E2A8014 000024 (v02 ALASKA)
ACPI: XSDT 0x000000003E2A7728 0000EC (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: FACP 0x000000003E243000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000003E1FF000 043CC0 (v02 ALASKA A M I 01072009 INTL 20160527)
ACPI: FACS 0x000000003E34A000 000040
ACPI: MCFG 0x000000003E248000 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x000000003E245000 002087 (v02 CpuRef CpuSsdt 00003000 INTL 20160527)
ACPI: SSDT 0x000000003E244000 000A52 (v02 PmRef ItbmSci 00003000 INTL 20160527)
ACPI: FIDT 0x000000003E1FE000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x000000003E1F6000 007E95 (v01 GBT GSWApp 00000001 INTL 20160527)
ACPI: SSDT 0x000000003E1F2000 0031DA (v02 SaSsdt SaSsdt 00003000 INTL 20160527)
ACPI: SSDT 0x000000003E1EF000 002703 (v02 Intel PegSsdt 00001000 INTL 20160527)
ACPI: HPET 0x000000003E24A000 000038 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: SSDT 0x000000003E1ED000 001E66 (v02 ALASKA A M I 00001000 INTL 20160527)
ACPI: SSDT 0x000000003E1EB000 00147B (v02 ALASKA A M I 00001000 INTL 20160527)
ACPI: SSDT 0x000000003E1E7000 00360D (v02 INTEL xh_cmsd4 00000000 INTL 20160527)
ACPI: NHLT 0x000000003E1E5000 001821 (v00 ALASKA A M I 01072009 AMI 01000013)
ACPI: LPIT 0x000000003E249000 000094 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: SSDT 0x000000003E1E1000 002720 (v02 ALASKA A M I 00001000 INTL 20160527)
ACPI: SSDT 0x000000003E1DE000 0025B2 (v02 ALASKA A M I 00000000 INTL 20160527)
ACPI: DBGP 0x000000003E1DD000 000034 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: DBG2 0x000000003E1DC000 000054 (v00 ALASKA A M I 01072009 AMI 01000013)
ACPI: SSDT 0x000000003E1DA000 001B67 (v02 ALASKA A M I 00001000 INTL 20160527)
ACPI: DMAR 0x000000003E1D9000 000070 (v01 INTEL EDK2 00000002 01000013)
ACPI: VFCT 0x000000003E1CB000 00DE84 (v01 ALASKA A M I 00000001 AMD 31504F47)
ACPI: BGRT 0x000000003E1CA000 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: WSMT 0x000000003E1E4000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: APIC 0x000000003E1C9000 000164 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000003E1C8000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000004bdffffff]
NODE_DATA(0) allocated [mem 0x4bdfd5000-0x4bdffffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000004bdffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x000000000009f000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x000000003cee0fff]
node 0: [mem 0x000000003cee2000-0x000000003cf04fff]
node 0: [mem 0x000000003cf06000-0x000000003d11afff]
node 0: [mem 0x000000003eeff000-0x000000003eefffff]
node 0: [mem 0x0000000100000000-0x00000004bdffffff]
Zeroed struct page in unavailable ranges: 20296 pages
Initmem setup node 0 [mem 0x0000000000001000-0x00000004bdffffff]
On node 0 totalpages: 4174008
DMA zone: 64 pages used for memmap
DMA zone: 26 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 3845 pages used for memmap
DMA32 zone: 246042 pages, LIFO batch:63
Normal zone: 61312 pages used for memmap
Normal zone: 3923968 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
e820: update [mem 0x36775000-0x367cbfff] usable ==> reserved
smpboot: Allowing 20 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x363dc000-0x363dcfff]
PM: hibernation: Registered nosave memory: [mem 0x36411000-0x36411fff]
PM: hibernation: Registered nosave memory: [mem 0x36517000-0x36517fff]
PM: hibernation: Registered nosave memory: [mem 0x3652f000-0x3652ffff]
PM: hibernation: Registered nosave memory: [mem 0x36775000-0x367cbfff]
PM: hibernation: Registered nosave memory: [mem 0x385a3000-0x385a3fff]
PM: hibernation: Registered nosave memory: [mem 0x3cee1000-0x3cee1fff]
PM: hibernation: Registered nosave memory: [mem 0x3cf05000-0x3cf05fff]
PM: hibernation: Registered nosave memory: [mem 0x3d11b000-0x3e11afff]
PM: hibernation: Registered nosave memory: [mem 0x3e11b000-0x3e24afff]
PM: hibernation: Registered nosave memory: [mem 0x3e24b000-0x3e34afff]
PM: hibernation: Registered nosave memory: [mem 0x3e34b000-0x3eefefff]
PM: hibernation: Registered nosave memory: [mem 0x3ef00000-0x3fffffff]
PM: hibernation: Registered nosave memory: [mem 0x40000000-0xdfffffff]
PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfbffffff]
PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfc00ffff]
PM: hibernation: Registered nosave memory: [mem 0xfc010000-0xfdffffff]
PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x40000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:20 nr_cpu_ids:20 nr_node_ids:1
percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144
pcpu-alloc: s188416 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 -- -- -- --
Built 1 zonelists, mobility grouping on. Total pages: 4108761
Policy zone: Normal
Kernel command line: BOOT_IMAGE=(hd0,gpt2)/vmlinuz-5.6.6-300.fc32.x86_64 root=/dev/mapper/fedora_localhost--live-root ro resume=/dev/mapper/fedora_localhost--live-swap rd.lvm.lv=fedora_localhost-live/root rd.lvm.lv=fedora_localhost-live/swap rhgb quiet
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 16123920K/16696032K available (14339K kernel code, 2400K rwdata, 4868K rodata, 2452K init, 6136K bss, 572112K reserved, 0K cma-reserved)
random: get_random_u64 called from __kmem_cache_create+0x3e/0x620 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=20, Nodes=1
ftrace: allocating 40698 entries in 159 pages
ftrace: allocated 159 pages with 6 groups
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=20.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=20
NR_IRQS: 524544, nr_irqs: 2216, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20200110
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar0: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000003e7dc000 end: 0x0000003ea25fff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6aa99074b1c, max_idle_ns: 881590506587 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 7399.70 BogoMIPS (lpj=3699850)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
SELinux: Initializing.
*** VALIDATE selinux ***
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup ***
*** VALIDATE cgroup2 ***
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Enhanced IBRS
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 36K
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i9-10900K CPU @ 3.70GHz (family: 0x6, model: 0xa5, stepping: 0x5)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19
smp: Brought up 1 node, 20 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 20 processors activated (147994.00 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x3cee1000-0x3cee1fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x3e24b000-0x3e34afff] (1048576 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 17:08:09, date: 2020-09-26
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1601140089.027:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
cryptd: max_cpu_qlen set to 1000
alg: No test for 842 (842-generic)
alg: No test for 842 (842-scomp)
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 12 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA0376A009000 0000FC (v02 PmRef Cpu0Psd 00003000 INTL 20160527)
ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA0376A179400 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA0376AFB9800 0006EC (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA0376A62A000 000137 (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA0376B111000 000BEA (v02 PmRef HwpLvt 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA0376AFBB000 000778 (v02 PmRef ApIst 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA0376A17B000 0003D7 (v02 PmRef ApHwp 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA0376B116000 000D22 (v02 PmRef ApPsd 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA0376A17C800 0003CA (v02 PmRef ApCst 00003000 INTL 20160527)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 10 GPEs in block 00 to 7F
ACPI: Power Resource [BTPR] (on)
ACPI: Power Resource [USBC] (on)
ACPI: Power Resource [PAUD] (on)
ACPI: Power Resource [V0PR] (on)
ACPI: Power Resource [V1PR] (on)
ACPI: Power Resource [V2PR] (on)
ACPI: Power Resource [PXTC] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: Power Resource [PIN] (off)
ACPI: Power Resource [SPR0] (off)
ACPI: Power Resource [SPR1] (off)
ACPI: Power Resource [SPR2] (off)
ACPI: Power Resource [SPR3] (off)
ACPI: Power Resource [SPR5] (off)
ACPI: Power Resource [ZPDR] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x40000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:9b33] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:12.0: [8086:06f9] type 00 class 0x118000
pci 0000:00:12.0: reg 0x10: [mem 0x50921000-0x50921fff 64bit]
pci 0000:00:14.0: [8086:06ed] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0x50900000-0x5090ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:06ef] type 00 class 0x050000
pci 0000:00:14.2: reg 0x10: [mem 0x5091a000-0x5091bfff 64bit]
pci 0000:00:14.2: reg 0x18: [mem 0x50920000-0x50920fff 64bit]
pci 0000:00:14.3: [8086:06f0] type 00 class 0x028000
pci 0000:00:14.3: reg 0x10: [mem 0x50914000-0x50917fff 64bit]
pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:06e0] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0x5091f000-0x5091ffff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:06d2] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0x50918000-0x50919fff]
pci 0000:00:17.0: reg 0x14: [mem 0x5091e000-0x5091e0ff]
pci 0000:00:17.0: reg 0x18: [io 0x4050-0x4057]
pci 0000:00:17.0: reg 0x1c: [io 0x4040-0x4043]
pci 0000:00:17.0: reg 0x20: [io 0x4020-0x403f]
pci 0000:00:17.0: reg 0x24: [mem 0x5091d000-0x5091d7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1b.0: [8086:06c0] type 01 class 0x060400
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.4: [8086:06ac] type 01 class 0x060400
pci 0000:00:1b.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.4: PTM enabled (root), 4ns granularity
pci 0000:00:1c.0: [8086:06b8] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:06bb] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PTM enabled (root), 4ns granularity
pci 0000:00:1c.4: [8086:06bc] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:06b0] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.4: [8086:06b4] type 01 class 0x060400
pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:0685] type 00 class 0x060100
pci 0000:00:1f.3: [8086:06c8] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0x50910000-0x50913fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0x50200000-0x502fffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:06a3] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0x5091c000-0x5091c0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:00:1f.5: [8086:06a4] type 00 class 0x0c8000
pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
pci 0000:01:00.0: [1002:1478] type 01 class 0x060400
pci 0000:01:00.0: reg 0x10: [mem 0x50700000-0x50703fff]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8 GT/s x8 link at 0000:00:01.0 (capable of 126.024 Gb/s with 16 GT/s x8 link)
pci 0000:00:01.0: PCI bridge to [bus 01-03]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0x50600000-0x507fffff]
pci 0000:00:01.0: bridge window [mem 0x40000000-0x501fffff 64bit pref]
pci 0000:02:00.0: [1002:1479] type 01 class 0x060400
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PCI bridge to [bus 02-03]
pci 0000:01:00.0: bridge window [io 0x3000-0x3fff]
pci 0000:01:00.0: bridge window [mem 0x50600000-0x506fffff]
pci 0000:01:00.0: bridge window [mem 0x40000000-0x501fffff 64bit pref]
pci 0000:03:00.0: [1002:7340] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0x40000000-0x4fffffff 64bit pref]
pci 0000:03:00.0: reg 0x18: [mem 0x50000000-0x501fffff 64bit pref]
pci 0000:03:00.0: reg 0x20: [io 0x3000-0x30ff]
pci 0000:03:00.0: reg 0x24: [mem 0x50600000-0x5067ffff]
pci 0000:03:00.0: reg 0x30: [mem 0x50680000-0x5069ffff pref]
pci 0000:03:00.0: BAR 0: assigned to efifb
pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:03:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8 GT/s x8 link at 0000:00:01.0 (capable of 252.048 Gb/s with 16 GT/s x16 link)
pci 0000:03:00.1: [1002:ab38] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0x506a0000-0x506a3fff]
pci 0000:03:00.1: PME# supported from D1 D2 D3hot D3cold
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [io 0x3000-0x3fff]
pci 0000:02:00.0: bridge window [mem 0x50600000-0x506fffff]
pci 0000:02:00.0: bridge window [mem 0x40000000-0x501fffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1b.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [144d:a808] type 00 class 0x010802
pci 0000:05:00.0: reg 0x10: [mem 0x50800000-0x50803fff 64bit]
pci 0000:00:1b.4: PCI bridge to [bus 05]
pci 0000:00:1b.4: bridge window [mem 0x50800000-0x508fffff]
acpiphp: Slot [1-1] registered
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:07:00.0: [8086:15f3] type 00 class 0x020000
pci 0000:07:00.0: reg 0x10: [mem 0x50400000-0x504fffff]
pci 0000:07:00.0: reg 0x1c: [mem 0x50500000-0x50503fff]
pci 0000:07:00.0: reg 0x30: [mem 0x50300000-0x503fffff pref]
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 07]
pci 0000:00:1c.3: bridge window [mem 0x50300000-0x505fffff]
acpiphp: Slot [1-2] registered
pci 0000:00:1c.4: PCI bridge to [bus 08]
acpiphp: Slot [1-3] registered
pci 0000:00:1d.0: PCI bridge to [bus 09]
acpiphp: Slot [1-4] registered
pci 0000:00:1d.4: PCI bridge to [bus 0a]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
iommu: Default domain type: Translated
pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:03:00.0: vgaarb: bridge control possible
pci 0000:03:00.0: vgaarb: setting as boot device
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x363dc018-0x37ffffff]
e820: reserve RAM buffer [mem 0x36517018-0x37ffffff]
e820: reserve RAM buffer [mem 0x36775000-0x37ffffff]
e820: reserve RAM buffer [mem 0x385a3000-0x3bffffff]
e820: reserve RAM buffer [mem 0x3cee1000-0x3fffffff]
e820: reserve RAM buffer [mem 0x3cf05000-0x3fffffff]
e820: reserve RAM buffer [mem 0x3d11b000-0x3fffffff]
e820: reserve RAM buffer [mem 0x3ef00000-0x3fffffff]
e820: reserve RAM buffer [mem 0x4be000000-0x4bfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
pnp: PnP ACPI init
system 00:00: [io 0x0a00-0x0a2f] has been reserved
system 00:00: [io 0x0a30-0x0a3f] has been reserved
system 00:00: [io 0x0a40-0x0a4f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x1854-0x1857] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:03: [mem 0xfc000000-0xfc00ffff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x1800-0x18fe] could not be reserved
system 00:04: [mem 0xfd000000-0xfd69ffff] has been reserved
system 00:04: [mem 0xfd6c0000-0xfd6cffff] has been reserved
system 00:04: [mem 0xfd6f0000-0xfdffffff] has been reserved
system 00:04: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:04: [mem 0xfe200000-0xfe7fffff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x2000-0x20fe] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfe038000-0xfe038fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000 add_align 100000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 08] add_size 200000 add_align 100000
pci 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 09] add_size 1000
pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000 add_align 100000
pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 09] add_size 200000 add_align 100000
pci 0000:00:1c.4: BAR 14: assigned [mem 0x50a00000-0x50bfffff]
pci 0000:00:1c.4: BAR 15: assigned [mem 0x50c00000-0x50dfffff 64bit pref]
pci 0000:00:1d.0: BAR 14: assigned [mem 0x50e00000-0x50ffffff]
pci 0000:00:1d.0: BAR 15: assigned [mem 0x51000000-0x511fffff 64bit pref]
pci 0000:00:1c.4: BAR 13: assigned [io 0x5000-0x5fff]
pci 0000:00:1d.0: BAR 13: assigned [io 0x6000-0x6fff]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [io 0x3000-0x3fff]
pci 0000:02:00.0: bridge window [mem 0x50600000-0x506fffff]
pci 0000:02:00.0: bridge window [mem 0x40000000-0x501fffff 64bit pref]
pci 0000:01:00.0: PCI bridge to [bus 02-03]
pci 0000:01:00.0: bridge window [io 0x3000-0x3fff]
pci 0000:01:00.0: bridge window [mem 0x50600000-0x506fffff]
pci 0000:01:00.0: bridge window [mem 0x40000000-0x501fffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01-03]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0x50600000-0x507fffff]
pci 0000:00:01.0: bridge window [mem 0x40000000-0x501fffff 64bit pref]
pci 0000:00:1b.0: PCI bridge to [bus 04]
pci 0000:00:1b.4: PCI bridge to [bus 05]
pci 0000:00:1b.4: bridge window [mem 0x50800000-0x508fffff]
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:00:1c.3: PCI bridge to [bus 07]
pci 0000:00:1c.3: bridge window [mem 0x50300000-0x505fffff]
pci 0000:00:1c.4: PCI bridge to [bus 08]
pci 0000:00:1c.4: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.4: bridge window [mem 0x50a00000-0x50bfffff]
pci 0000:00:1c.4: bridge window [mem 0x50c00000-0x50dfffff 64bit pref]
pci 0000:00:1d.0: PCI bridge to [bus 09]
pci 0000:00:1d.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:1d.0: bridge window [mem 0x50e00000-0x50ffffff]
pci 0000:00:1d.0: bridge window [mem 0x51000000-0x511fffff 64bit pref]
pci 0000:00:1d.4: PCI bridge to [bus 0a]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 8 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 9 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 10 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 11 [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: resource 12 [mem 0x40000000-0xdfffffff window]
pci_bus 0000:00: resource 13 [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0x50600000-0x507fffff]
pci_bus 0000:01: resource 2 [mem 0x40000000-0x501fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0x50600000-0x506fffff]
pci_bus 0000:02: resource 2 [mem 0x40000000-0x501fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0x50600000-0x506fffff]
pci_bus 0000:03: resource 2 [mem 0x40000000-0x501fffff 64bit pref]
pci_bus 0000:05: resource 1 [mem 0x50800000-0x508fffff]
pci_bus 0000:07: resource 1 [mem 0x50300000-0x505fffff]
pci_bus 0000:08: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:08: resource 1 [mem 0x50a00000-0x50bfffff]
pci_bus 0000:08: resource 2 [mem 0x50c00000-0x50dfffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:09: resource 1 [mem 0x50e00000-0x50ffffff]
pci_bus 0000:09: resource 2 [mem 0x51000000-0x511fffff 64bit pref]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:03:00.0: disabling ATS
pci 0000:03:00.1: D0 power state depends on 0000:03:00.0
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 42428K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x2df1b000-0x31f1b000] (64MB)
platform rtc_cmos: registered platform RTC device (no PNP device found)
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
Platform Keyring initialized
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pcieport 0000:00:01.0: AER: enabled with IRQ 121
pcieport 0000:00:1b.4: AER: enabled with IRQ 123
pcieport 0000:00:1b.4: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
pcieport 0000:00:1c.3: AER: enabled with IRQ 125
pcieport 0000:00:1c.3: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0x40000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: \_SB_.PR00: Found 3 idle states
intel_idle: v0.4.1 model 0xA5
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf clo only pio slum part ems deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0x5091d000 port 0x5091d100 irq 131
ata2: SATA max UDMA/133 abar m2048@0x5091d000 port 0x5091d180 irq 131
ata3: SATA max UDMA/133 abar m2048@0x5091d000 port 0x5091d200 irq 131
ata4: SATA max UDMA/133 abar m2048@0x5091d000 port 0x5091d280 irq 131
ata5: SATA max UDMA/133 abar m2048@0x5091d000 port 0x5091d300 irq 131
ata6: SATA max UDMA/133 abar m2048@0x5091d000 port 0x5091d380 irq 131
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.6.6-300.fc32.x86_64 xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.6.6-300.fc32.x86_64 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb: port power management may be unreliable
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: RTC can wake from S4
rtc_cmos rtc_cmos: registered as rtc0
rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
intel_pmc_core INT33A1:00: initialized
drop_monitor: Initializing network drop monitor service
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: sig=0xa0655, pf=0x2, revision=0xc8
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
sched_clock: Marking stable (3481260932, 4530740)->(3497715092, -11923420)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: 0d97d514d1651893ca89cc557d3830fffcdfaba2'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type big_key registered
Key type encrypted registered
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
PM: Magic number: 4:840:138
rtc_cmos rtc_cmos: setting system clock to 2020-09-26T17:08:13 UTC (1601140093)
ata3: SATA link down (SStatus 4 SControl 300)
ata1: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image (initmem) memory: 2452K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image (text/rodata gap) memory: 2044K
Freeing unused kernel image (rodata/data gap) memory: 1276K
usb 1-7: new high-speed USB device number 2 using xhci_hcd
x86/mm: Checked W+X mappings: passed, no W+X pages found.
rodata_test: all tests were successful
Run /init as init process
with arguments:
/init
rhgb
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=(hd0,gpt2)/vmlinuz-5.6.6-300.fc32.x86_64
systemd[1]: systemd v245.4-1.fc32 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Reached target Local File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Swap.
systemd[1]: Reached target Timers.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Started Hardware RNG Entropy Gatherer Daemon.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Create Static Device Nodes in /dev.
fuse: init (API version 7.31)
*** VALIDATE fuseblk ***
*** VALIDATE fuse ***
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Setup Virtual Console.
systemd[1]: Condition check resulted in dracut ask for additional cmdline parameters being skipped.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Finished dracut cmdline hook.
systemd[1]: Starting dracut pre-udev hook...
systemd[1]: Finished dracut pre-udev hook.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started udev Kernel Device Manager.
audit: type=1130 audit(1601140094.089:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Condition check resulted in dracut pre-trigger hook being skipped.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Started Journal Service.
audit: type=1130 audit(1601140094.101:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1601140094.105:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:02)
acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:02)
audit: type=1130 audit(1601140094.128:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1601140094.142:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Intel(R) 2.5G Ethernet Linux Driver - version 0.0.1-k
Copyright(c) 2018 Intel Corporation.
nvme nvme0: pci function 0000:05:00.0
AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel
AMD-Vi: AMD IOMMUv2 functionality not available on this system
igc 0000:07:00.0: added PHC on eth0
igc 0000:07:00.0: 4.000 Gb/s available PCIe bandwidth (5 GT/s x1 link)
igc 0000:07:00.0 eth0: MAC: 18:c0:4d:26:66:42
igc 0000:07:00.0 enp7s0: renamed from eth0
[drm] amdgpu kernel modesetting enabled.
CRAT table not found
Virtual CRAT table created for CPU
Parsing CRAT table with 1 nodes
Creating topology SYSFS entries
Topology: Add CPU node
Finished initializing topology
checking generic (40000000 300000) vs hw (40000000 10000000)
fb0: switching to amdgpudrmfb from EFI VGA
amdgpu 0000:03:00.0: vgaarb: deactivate vga console
amdgpu 0000:03:00.0: enabling device (0006 -> 0007)
[drm] initializing kernel modesetting (NAVI14 0x1002:0x7340 0x1458:0x2319 0xC5).
[drm] register mmio base: 0x50600000
[drm] register mmio size: 524288
[drm] set register base offset for ATHUB
[drm] set register base offset for CLKA
[drm] set register base offset for CLKA
[drm] set register base offset for CLKA
[drm] set register base offset for CLKA
[drm] set register base offset for CLKA
[drm] set register base offset for DF
[drm] set register base offset for DMU
[drm] set register base offset for GC
[drm] set register base offset for HDP
[drm] set register base offset for MMHUB
[drm] set register base offset for MP0
[drm] set register base offset for MP1
[drm] set register base offset for NBIF
[drm] set register base offset for NBIF
[drm] set register base offset for OSSSYS
[drm] set register base offset for SDMA0
[drm] set register base offset for SDMA1
[drm] set register base offset for SMUIO
[drm] set register base offset for THM
[drm] set register base offset for UVD
[drm] add ip block number 0
[drm] add ip block number 1
[drm] add ip block number 2
[drm] add ip block number 3
[drm] add ip block number 4
[drm] add ip block number 5
[drm] add ip block number 6
[drm] add ip block number 7
[drm] add ip block number 8
[drm] add ip block number 9
ATOM BIOS: xxx-xxx-xxx
[drm] VCN decode is enabled in VM mode
[drm] VCN encode is enabled in VM mode
[drm] JPEG decode is enabled in VM mode
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
amdgpu 0000:03:00.0: VRAM: 8176M 0x0000008000000000 - 0x00000081FEFFFFFF (8176M used)
amdgpu 0000:03:00.0: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
[drm] Detected VRAM RAM=8176M, BAR=256M
[drm] RAM width 128bits GDDR6
[TTM] Zone kernel: Available graphics memory: 8152404 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 8176M of VRAM memory ready
[drm] amdgpu: 8176M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCIE GART of 512M enabled (table at 0x0000008000300000).
amdgpu 0000:03:00.0: Direct firmware load for amdgpu/navi14_ta.bin failed with error -2
amdgpu 0000:03:00.0: psp v11.0: Failed to load firmware "amdgpu/navi14_ta.bin"
[drm] use_doorbell being set to: [true]
[drm] use_doorbell being set to: [true]
[drm] Found VCN firmware Version ENC: 1.7 DEC: 4 VEP: 0 Revision: 13
[drm] PSP loading VCN firmware
tsc: Refined TSC clocksource calibration: 3695.990 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a8d14a8d8c, max_idle_ns: 881590883936 ns
clocksource: Switched to clocksource tsc
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme0: Shutdown timeout set to 8 seconds
nvme nvme0: 20/0/0 default/read/poll queues
nvme0n1: p1 p2 p3
[drm] reserve 0xa00000 from 0x81fe400000 for PSP TMR
amdgpu: [powerplay] use vbios provided pptable
amdgpu: [powerplay] smu driver if version = 0x00000034, smu fw if version = 0x00000036, smu fw version = 0x00351a00 (53.26.0)
amdgpu: [powerplay] SMU driver if version not matched
amdgpu: [powerplay] SMU is initialized successfully!
[drm] Display Core initialized with v3.2.69!
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] kiq ring mec 2 pipe 1 q 0
[drm] VCN decode and encode initialized successfully(under DPG Mode).
[drm] JPEG decode initialized successfully.
kfd kfd: Allocated 3969056 bytes on gart
Virtual CRAT table created for GPU
Parsing CRAT table with 1 nodes
Creating topology SYSFS entries
Topology: Add dGPU node [0x7340:0x1002]
kfd kfd: added device 1002:7340
[drm] fb mappable at 0x404C1000
[drm] vram apper at 0x40000000
[drm] size 33177600
[drm] fb depth is 24
[drm] pitch is 15360
fbcon: amdgpudrmfb (fb0) is primary device
fbcon: Deferring console take-over
amdgpu 0000:03:00.0: fb0: amdgpudrmfb frame buffer device
amdgpu 0000:03:00.0: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
amdgpu 0000:03:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
amdgpu 0000:03:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
amdgpu 0000:03:00.0: ring comp_1.2.0 uses VM inv eng 5 on hub 0
amdgpu 0000:03:00.0: ring comp_1.3.0 uses VM inv eng 6 on hub 0
amdgpu 0000:03:00.0: ring comp_1.0.1 uses VM inv eng 7 on hub 0
amdgpu 0000:03:00.0: ring comp_1.1.1 uses VM inv eng 8 on hub 0
amdgpu 0000:03:00.0: ring comp_1.2.1 uses VM inv eng 9 on hub 0
amdgpu 0000:03:00.0: ring comp_1.3.1 uses VM inv eng 10 on hub 0
amdgpu 0000:03:00.0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
amdgpu 0000:03:00.0: ring sdma0 uses VM inv eng 12 on hub 0
amdgpu 0000:03:00.0: ring sdma1 uses VM inv eng 13 on hub 0
amdgpu 0000:03:00.0: ring vcn_dec uses VM inv eng 0 on hub 1
amdgpu 0000:03:00.0: ring vcn_enc0 uses VM inv eng 1 on hub 1
amdgpu 0000:03:00.0: ring vcn_enc1 uses VM inv eng 4 on hub 1
amdgpu 0000:03:00.0: ring jpeg_dec uses VM inv eng 5 on hub 1
[drm] Initialized amdgpu 3.36.0 20150101 for 0000:03:00.0 on minor 0
[drm:mod_hdcp_add_display_topology [amdgpu]] *ERROR* Failed to add display topology, DTM TA is not initialized.
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
usb 1-7: device not accepting address 2, error -62
usb 1-7: new high-speed USB device number 3 using xhci_hcd
usb 1-7: New USB device found, idVendor=abcd, idProduct=1234, bcdDevice= 1.00
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-7: Product: UDisk
usb 1-7: Manufacturer: General
usb 1-7: SerialNumber: Љ
usb 1-11: new high-speed USB device number 4 using xhci_hcd
usb 1-11: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
usb 1-11: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-11: Product: USB2.0 Hub
hub 1-11:1.0: USB hub found
hub 1-11:1.0: 4 ports detected
usb 1-12: new full-speed USB device number 5 using xhci_hcd
usb 1-12: New USB device found, idVendor=048d, idProduct=5702, bcdDevice= 0.01
usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-12: Product: ITE Device
usb 1-12: Manufacturer: ITE Tech. Inc.
hid-generic 0003:048D:5702.0001: hiddev96,hidraw0: USB HID v1.12 Device [ITE Tech. Inc. ITE Device] on usb-0000:00:14.0-12/input0
usb 1-11.2: new high-speed USB device number 6 using xhci_hcd
usb 1-11.2: New USB device found, idVendor=0451, idProduct=8142, bcdDevice= 1.00
usb 1-11.2: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 1-11.2: SerialNumber: BD040861B5A0
hub 1-11.2:1.0: USB hub found
hub 1-11.2:1.0: 4 ports detected
usb 1-13: new high-speed USB device number 7 using xhci_hcd
usb 1-13: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
usb 1-13: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-13: Product: USB2.0 Hub
hub 1-13:1.0: USB hub found
hub 1-13:1.0: 4 ports detected
usb 1-14: new full-speed USB device number 8 using xhci_hcd
usb 1-14: New USB device found, idVendor=8087, idProduct=0026, bcdDevice= 0.02
usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb-storage 1-7:1.0: USB Mass Storage device detected
scsi host6: usb-storage 1-7:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usb 1-11.2.1: new low-speed USB device number 9 using xhci_hcd
usb 1-11.2.1: New USB device found, idVendor=04f2, idProduct=0833, bcdDevice= 2.30
usb 1-11.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-11.2.1: Product: USB Keyboard
usb 1-11.2.1: Manufacturer: CHICONY
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.2/1-11.2.1/1-11.2.1:1.0/0003:04F2:0833.0002/input/input3
hid-generic 0003:04F2:0833.0002: input,hidraw1: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:14.0-11.2.1/input0
input: CHICONY USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.2/1-11.2.1/1-11.2.1:1.1/0003:04F2:0833.0003/input/input4
input: CHICONY USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.2/1-11.2.1/1-11.2.1:1.1/0003:04F2:0833.0003/input/input5
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.2/1-11.2.1/1-11.2.1:1.1/0003:04F2:0833.0003/input/input6
hid-generic 0003:04F2:0833.0003: input,hiddev97,hidraw2: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:00:14.0-11.2.1/input1
usb 1-11.2.2: new full-speed USB device number 10 using xhci_hcd
usb 1-11.2.2: New USB device found, idVendor=046d, idProduct=c084, bcdDevice= 7.03
usb 1-11.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-11.2.2: Product: G203 Prodigy Gaming Mouse
usb 1-11.2.2: Manufacturer: Logitech
usb 1-11.2.2: SerialNumber: 087E37793234
input: Logitech G203 Prodigy Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.2/1-11.2.2/1-11.2.2:1.0/0003:046D:C084.0004/input/input7
hid-generic 0003:046D:C084.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech G203 Prodigy Gaming Mouse] on usb-0000:00:14.0-11.2.2/input0
input: Logitech G203 Prodigy Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.2/1-11.2.2/1-11.2.2:1.1/0003:046D:C084.0005/input/input8
input: Logitech G203 Prodigy Gaming Mouse Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.2/1-11.2.2/1-11.2.2:1.1/0003:046D:C084.0005/input/input9
input: Logitech G203 Prodigy Gaming Mouse System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.2/1-11.2.2/1-11.2.2:1.1/0003:046D:C084.0005/input/input10
hid-generic 0003:046D:C084.0005: input,hiddev98,hidraw4: USB HID v1.11 Keyboard [Logitech G203 Prodigy Gaming Mouse] on usb-0000:00:14.0-11.2.2/input1
audit: type=1130 audit(1601140106.312:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1601140106.330:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1334 audit(1601140106.346:9): prog-id=7 op=UNLOAD
audit: type=1334 audit(1601140106.346:10): prog-id=6 op=UNLOAD
audit: type=1334 audit(1601140106.347:11): prog-id=5 op=UNLOAD
audit: type=1334 audit(1601140106.347:12): prog-id=4 op=UNLOAD
audit: type=1334 audit(1601140106.347:13): prog-id=3 op=UNLOAD
audit: type=1334 audit(1601140106.386:14): prog-id=8 op=LOAD
audit: type=1334 audit(1601140106.387:15): prog-id=9 op=LOAD
audit: type=1334 audit(1601140106.387:16): prog-id=10 op=LOAD
systemd-journald[401]: Received SIGTERM from PID 1 (systemd).
scsi 6:0:0:0: Direct-Access General UDisk 5.00 PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi generic sg0 type 0
sd 6:0:0:0: [sda] 61440000 512-byte logical blocks: (31.5 GB/29.3 GiB)
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 0b 00 00 08
sd 6:0:0:0: [sda] No Caching mode page found
sd 6:0:0:0: [sda] Assuming drive cache: write through
SELinux: Permission watch in class filesystem not defined in policy.
SELinux: Permission watch in class file not defined in policy.
SELinux: Permission watch_mount in class file not defined in policy.
SELinux: Permission watch_sb in class file not defined in policy.
SELinux: Permission watch_with_perm in class file not defined in policy.
SELinux: Permission watch_reads in class file not defined in policy.
SELinux: Permission watch in class dir not defined in policy.
SELinux: Permission watch_mount in class dir not defined in policy.
SELinux: Permission watch_sb in class dir not defined in policy.
SELinux: Permission watch_with_perm in class dir not defined in policy.
SELinux: Permission watch_reads in class dir not defined in policy.
SELinux: Permission watch in class lnk_file not defined in policy.
SELinux: Permission watch_mount in class lnk_file not defined in policy.
SELinux: Permission watch_sb in class lnk_file not defined in policy.
SELinux: Permission watch_with_perm in class lnk_file not defined in policy.
SELinux: Permission watch_reads in class lnk_file not defined in policy.
SELinux: Permission watch in class chr_file not defined in policy.
SELinux: Permission watch_mount in class chr_file not defined in policy.
SELinux: Permission watch_sb in class chr_file not defined in policy.
SELinux: Permission watch_with_perm in class chr_file not defined in policy.
SELinux: Permission watch_reads in class chr_file not defined in policy.
SELinux: Permission watch in class blk_file not defined in policy.
SELinux: Permission watch_mount in class blk_file not defined in policy.
SELinux: Permission watch_sb in class blk_file not defined in policy.
SELinux: Permission watch_with_perm in class blk_file not defined in policy.
SELinux: Permission watch_reads in class blk_file not defined in policy.
SELinux: Permission watch in class sock_file not defined in policy.
SELinux: Permission watch_mount in class sock_file not defined in policy.
SELinux: Permission watch_sb in class sock_file not defined in policy.
SELinux: Permission watch_with_perm in class sock_file not defined in policy.
SELinux: Permission watch_reads in class sock_file not defined in policy.
SELinux: Permission watch in class fifo_file not defined in policy.
SELinux: Permission watch_mount in class fifo_file not defined in policy.
SELinux: Permission watch_sb in class fifo_file not defined in policy.
SELinux: Permission watch_with_perm in class fifo_file not defined in policy.
SELinux: Permission watch_reads in class fifo_file not defined in policy.
SELinux: Class perf_event not defined in policy.
SELinux: Class lockdown not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
systemd[1]: Successfully loaded SELinux policy in 110.614ms.
systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 17.546ms.
systemd[1]: systemd v245.4-1.fc32 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
sda: sda1 sda2 sda3
sd 6:0:0:0: [sda] Attached SCSI removable disk
systemd[1]: /usr/lib/systemd/system/sssd.service:13: PIDFile= references a path below legacy directory /var/run/, updating /var/run/sssd.pid → /run/sssd.pid; please update the unit file accordingly.
systemd[1]: /usr/lib/systemd/system/sssd-kcm.socket:7: ListenStream= references a path below legacy directory /var/run/, updating /var/run/.heim_org.h5l.kcm-socket → /run/.heim_org.h5l.kcm-socket; please update the unit file accordingly.
systemd[1]: initrd-switch-root.service: Succeeded.
systemd[1]: Stopped Switch Root.
systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
systemd[1]: Created slice Virtual Machine and Container Slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Login Prompts.
systemd[1]: Stopped target Switch Root.
systemd[1]: Stopped target Initrd File Systems.
systemd[1]: Stopped target Initrd Root File System.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on multipathd control socket.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on User Database Manager Socket.
systemd[1]: Activating swap /dev/mapper/fedora_localhost--live-swap...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
systemd[1]: Starting Preprocess NFS configuration convertion...
systemd[1]: plymouth-switch-root.service: Succeeded.
systemd[1]: Stopped Plymouth switch root service.
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Stopped Journal Service.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Repartition Root Disk...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: sysroot.mount: Succeeded.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: nfs-convert.service: Succeeded.
systemd[1]: Finished Preprocess NFS configuration convertion.
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Finished Repartition Root Disk.
systemd[1]: Mounted FUSE Control File System.
EXT4-fs (dm-0): re-mounted. Opts: (null)
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Condition check resulted in OSTree Remount OS/ Bind Mounts being skipped.
systemd[1]: Condition check resulted in First Boot Wizard being skipped.
Adding 8220668k swap on /dev/mapper/fedora_localhost--live-swap. Priority:-2 extents:1 across:8220668k SSFS
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Condition check resulted in Create System Users being skipped.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Activated swap /dev/mapper/fedora_localhost--live-swap.
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Reached target Swap.
systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
systemd[1]: Mounting Temporary Directory (/tmp)...
systemd[1]: Mounted Temporary Directory (/tmp).
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Finished udev Coldplug all Devices.
systemd[1]: Starting udev Wait for Complete Device Initialization...
systemd[1]: Started Journal Service.
systemd-journald[783]: Received client request to flush runtime journal.
intel_pch_thermal 0000:00:12.0: enabling device (0000 -> 0002)
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-QuZ-a0-hr-b0-52.ucode failed with error -2
iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-QuZ-a0-hr-b0-51.ucode failed with error -2
iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-QuZ-a0-hr-b0-50.ucode failed with error -2
iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-QuZ-a0-hr-b0-49.ucode failed with error -2
iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 43.2.23.17
iwlwifi 0000:00:14.3: Found debug destination: EXTERNAL_DRAM
iwlwifi 0000:00:14.3: Found debug configuration: 0
iwlwifi 0000:00:14.3: loaded firmware version 48.4fa0041f.0 QuZ-a0-hr-b0-48.ucode op_mode iwlmvm
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6 AX201 160MHz, REV=0x354
iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM
iwlwifi 0000:00:14.3: Allocated 0x00400000 bytes for firmware monitor.
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:03:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:03:00.1: Force to non-snoop mode
snd_hda_intel 0000:03:00.1: bound 0000:03:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input13
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input14
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input15
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input16
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input17
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input18
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1220: line_outs=3 (0x1b/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
iwlwifi 0000:00:14.3: base HW address: 04:33:c2:c4:db:a0
thermal thermal_zone2: failed to read out thermal zone (-61)
input: PC Speaker as /devices/platform/pcspkr/input/input26
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
Bluetooth: hci0: Firmware revision 0.0 build 128 week 11 2020
RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
iwlwifi 0000:00:14.3 wlo1: renamed from wlan0
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM
iwlwifi 0000:00:14.3: FW already configured (0) - re-configuring
iwlwifi 0000:00:14.3: BIOS contains WGDS but no WRDS
iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM
iwlwifi 0000:00:14.3: FW already configured (0) - re-configuring
iwlwifi 0000:00:14.3: BIOS contains WGDS but no WRDS
igc 0000:07:00.0 enp7s0: igc: enp7s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
rfkill: input handler disabled
rfkill: input handler enabled
rfkill: input handler disabled
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
show_signal: 79 callbacks suppressed
traps: ibus-daemon[3123] trap int3 ip:7f054adb7867 sp:7ffeaad91170 error:0 in libglib-2.0.so.0.6400.1[7f054ad7a000+86000]
usb 1-7: USB disconnect, device number 3
Rounding down aligned max_sectors from 4294967295 to 4294967288
db_root: cannot open: /etc/target
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (iser)
RPC: Registered rdma transport module.
RPC: Registered rdma backchannel transport module.
nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
perf: interrupt took too long (2569 > 2500), lowering kernel.perf_event_max_sample_rate to 77000
perf: interrupt took too long (3220 > 3211), lowering kernel.perf_event_max_sample_rate to 62000
perf: interrupt took too long (4059 > 4025), lowering kernel.perf_event_max_sample_rate to 49000
perf: interrupt took too long (5079 > 5073), lowering kernel.perf_event_max_sample_rate to 39000